Our programme
Products & specifications
Plywood, OSB and wood-based panels, formwork accessories, insulation and OSB surface finishing. Everything below is supplied from stock or to order — if your specification isn't listed, ask.
Product group 01
Plywood
Birch and softwood plywood with interior (FK) or moisture-resistant (FSF) glue, plus film-faced formwork panels. Every thickness is supplied in full factory packs.
Birch plywood FK — interior, 1525 × 1525 mm
| Grade | Surface | Thicknesses (mm) |
|---|---|---|
| 4/4 | Unsanded, construction | 4, 6, 8, 9, 10, 12, 15, 18, 21 |
| 3/4 – 2/4 | Sanded | 3, 4, 6, 8, 9, 10, 12, 15, 18, 21 |
| 3/3 | Sanded | 3, 4, 6, 8, 9, 10, 12, 15, 18, 21 |
| 2/2 | Sanded | 3, 4, 6, 8, 9, 10, 12, 15, 18, 21 |
Sheets per pack (1525 × 1525 mm): 3 mm — 130 · 4 mm — 100–108 · 6 mm — 65–72 · 8 mm — 50–54 · 9 mm — 44–48 · 10 mm — 40–43 · 12 mm — 33–36 · 15 mm — 26–29 · 18 mm — 22–24 · 21 mm — 19–22.
Birch plywood FSF — moisture resistant
| Sheet size (mm) | Grades | Thicknesses (mm) | Sheets per pack |
|---|---|---|---|
| 1250 × 2500 | 4/4 · 3/4 | 6.5, 9, 12, 15, 18, 21 | 138, 100, 75, 60, 50, 43 |
| 1220 × 2440 | 4/4 · 3/4 | 4, 6.5, 9, 12, 15, 18, 21 | 80, 54, 40, 32, 27, 23 |
Softwood FSF & film-faced formwork plywood
| Type | Sheet size (mm) | Grade | Thicknesses (mm) | Sheets per pack |
|---|---|---|---|---|
| Softwood plywood FSF | 1220 × 2440 | 3/3 | 9, 12, 15, 18, 21 | 56, 42, 33, 28, 24 |
| Film-faced, laminated | 1220 × 2440 | 1/1 | 12, 15, 18, 21 | on request |
FK — interior glue. FSF — moisture-resistant glue. Film-faced panels are intended for concrete formwork and repeated use.
Product group 02
OSB & wood-based panels
Structural OSB-3, cement-bonded board, chipboard, hardboard and tongue-and-groove construction board — for framing, sheathing, flooring, façades and site works.
OSB-3 — load-bearing, for humid conditions
| Sheet size (mm) | Thicknesses (mm) | Sheets per pack |
|---|---|---|
| 1250 × 2500 | 6, 8, 9, 12, 15, 18, 22, 25 | 112, 90, 78–80, 60, 48, 39–40, 32–33, 26 |
| 1220 × 2440 | 9, 12, 15, 18, 22 | 96, 72, 58, 48, 40 |
| 1250 × 2800 | 12 | 60 |
Other wood-based panels
| Panel | Sheet size (mm) | Thickness (mm) | Notes |
|---|---|---|---|
| Cement-bonded particle board | 3200 × 1200 | 8, 10, 12, 16, 20 | 14–35 sheets per pack |
| Chipboard, sanded both sides | 2440 × 1830 · 2750 × 1830 | 16 | Grade 1 |
| Hardboard / fibreboard | 2140 × 1220 · 2440 × 1220 · 2745 × 1220 · 2745 × 1700 · 1220 × 2440 | 2.2 · 2.5 | Smooth one side |
| Tongue-and-groove construction board | 2440 × 900 · 2440 × 600 · 1830 × 600 · 1200 × 900 · 1200 × 600 | 12, 16, 22, 38 | E1, P5 — moisture resistant |
Product group 03
Formwork accessories & fasteners
Everything that goes around the panel on a concrete site — clamps, rebar tools, spacers and fixings.
| Item | Types & sizes |
|---|---|
| Formwork spring clamps | Standard · HIT · HIT reinforced · AFACAN · Hold; clamp keys (standard and reinforced) |
| Rebar bending keys | 10, 12, 14, 16, 18, 20, 22, 24, 28 mm |
| Rebar bending machines (manual) | 10, 12, 14, 16 mm |
| Rebar cutters (manual) | 18, 22, 26, 28, 32 mm |
| Bolt cutters | 6, 8, 10, 12, 14, 16 mm |
| Rebar spacers | Star 20–50 mm · chair 20–40 mm · support 15–80 mm · stand 10–40 mm · FS-30 to FS-60 · multi-level 35/45 |
| Rebar tying nippers, concrete hammer | Standard |
| Nails | 70, 80, 90, 100, 120 mm |
| Wood screws | 41, 51, 55, 65, 75 mm |
Product group 04
Insulation, membranes & briquettes
Stone wool insulation, vapour and wind-protection membranes, and birch fuel briquettes — supplied alongside panel and timber loads.
| Product | Size | Specification |
|---|---|---|
| Stone wool insulation | 1200 × 600 × 50 mm · 1200 × 600 × 100 mm | Density 35 |
| Stone wool, frame grade | 1200 × 610 × 50 mm | Density 50 |
| Wind & moisture protection membrane | 70 m² roll | Type A |
| Two-layer hydro/wind membrane | 70 m² roll | Type AM |
| Vapour barrier | 70 m² roll | Type B |
| Hydro-vapour barrier | 70 m² roll | Type C · Type D (universal) |
| Birch fuel briquettes | 160 × 100 × 60 mm | 10 kg packs · 12 pcs per pack |
Product group 05
Surface finishing for OSB
Primers, fillers, paints and decorative plasters formulated specifically for OSB board — for facades, frame houses and interior work.
| Product | Pack sizes | Finish / notes |
|---|---|---|
| Insulating polyurethane primer | 0.9 · 2.7 · 9 kg | Blocks resin bleed-through |
| Primer for OSB board | 1 · 7 · 14 kg | Interior and exterior |
| Filler for OSB board | 1.3 · 7 kg | Joint and surface filling |
| Construction sealant, OSB & timber surfaces | 310 ml cartridge | Beige · white |
| Paint for OSB board | 1 · 7 · 14 kg | Interior and exterior; ready colour or Base C for tinting |
| Facade paint-primer, 3-in-1 | 1 · 7 · 14 kg | Primer, paint and protection in one; ready colour or Base C |
| Decorative elastic textured paint | 3.5 · 12 kg | White or Base C for tinting |
| Decorative elastic plaster, "Bark Beetle" texture | 6 · 16 kg | White · beige |
| Decorative elastic plaster, "Fur Coat" texture | 6 · 16 kg | White · beige |
Supplied by the pack; multiple packs per carton for the smaller sizes. Colour matching and quantities on request.
Packaging & delivery
Packed to survive the journey
Panels ship in full factory packs with the sheet count stated for every thickness. Every pack is labelled with product, format, thickness and grade, and loaded to make unloading fast and safe.
FAQ
Common questions
What is your minimum order quantity?
Panels are supplied by full pack and by full truckload. Mixed loads combining several products, formats and thicknesses are welcome. Smaller trial orders can be arranged for new partners.
Which sheet formats and thicknesses do you supply?
Plywood is available in 1525×1525, 1220×2440 and 1250×2500 mm from 3 to 21 mm. OSB-3 comes in 1250×2500, 1220×2440 and 1250×2800 mm from 6 to 25 mm. Cement-bonded board is 3200×1200 mm from 8 to 20 mm. Other formats on request.
Can you cut non-standard sizes and sections?
Yes. Panels can be cut to size for volume orders, and non-standard timber sections and lengths are sawn to order. Send the exact dimensions, tolerance and quantity and we will confirm feasibility and lead time with the offer.
How is the material packed and delivered?
Panels are supplied in full factory packs with the sheet count per pack stated for every thickness; each pack is labelled with product, format, thickness and grade. We deliver by full truck and container to all regions of Türkiye.
Send us your specification
Products, formats, thicknesses, grades and delivery point — we'll come back with a firm offer.